We can recognise a deep room even when part of it is out of focus. Depth of field concerns the range of acceptable sharpness, not the amount of space represented in the image.
A deep space can have few sharply defined elements
Spatial depth describes the relationship between near and distant objects. Depth of field refers to the range of distances that appears acceptably sharp under particular viewing conditions. A corridor can extend into the background while only one character remains in focus. There can also be many sharply defined surfaces in a relatively flat composition. Confusing the two leads us to attribute to focus an arrangement that depends on the set and the camera.
The word ‘acceptable’ matters. Focus does not always establish a clear visual boundary between two regions. Definition is gradually lost, and our perception of it depends on the size of the display and on how much detail we are looking at. A face may be legible enough while an inscription at the same distance is too blurred for its letters to be read. Analysing focus means relating sharpness to the visual task, rather than treating it as an absolute division.
The lens aperture, focusing distance, focal length and format conditions all affect this range. However, an isolated formula can be misleading when the framing changes. If the focal length is changed and the camera is then moved to restore the character’s size, the same situation is no longer being preserved. A useful comparison states which variables remain constant and which one is being changed.
The lighting plays a part because it affects exposure possibilities and how contours are perceived. It is not enough to identify a dark background and declare it out of focus: it may contain little visible detail because of a lack of light or contrast. A uniform surface can also make it difficult to judge sharpness accurately. It is worth looking for edges, textures and changes during movement before attributing an intention to the focus.
Barry Lyndon: concentrated attention within a broad composition
The candlelit scenes in Barry Lyndon presented particular focusing constraints. John Alcott described the limited depth of field associated with the conditions used. This technical detail helps explain why the performers’ distance required attention, but it does not mean that every image in the film was treated in the same way. The filming of the candlelit scenes explores this case without turning it into a general formula for the rest of the film.
In these compositions, recognising a table, several figures and a background does not require them all to be equally sharp. Attention can rest on one face while other elements retain enough presence to situate it. The relationship between sharpness and legibility is more flexible than the opposition between showing and hiding. An out-of-focus character can still communicate posture, proximity and involvement in an encounter.
A shift in focus, when it occurs, can transfer attention without changing the camera’s position. This is different from a zoom or a cut to another shot. The space remains available, but the ease with which we distinguish its details changes. To describe this, we need to follow the shot, because a single frame does not reveal whether an area has just become sharp or is about to lose sharpness.
Alcott’s work should be considered in relation to the performers’ positions and the organisation of the shot. A conversation may place faces at similar distances or distribute them in depth. Each option creates a different relationship between simultaneity and selection. Sharpness alone does not determine who matters: voice, gesture and contrast can draw attention to a figure that is not the sharpest element.
Legible spaces and distributed attention
The Shining uses interiors in which the viewer can recognise routes and positions across several elements. This legibility encourages us to observe the background and wait for something to appear. It does not require us to claim that every object is equally sharp in every shot. The cinematography combines light, composition and movement to make the space remain a source of information.
As Danny moves through the hotel, the distance between the camera, the boy and the next corner changes. The perception of depth also comes from the scale of the doors, the movement of surfaces and what is hidden beyond the turns. Even a frame rich in detail leaves areas outside the frame. Keeping several areas legible is not the same as providing total knowledge of the building.
The camera height can change which elements overlap. A low position allows a body or a piece of furniture to obscure part of the background; a higher one may reveal it. This change in visibility is not necessarily a change of focus. Separating overlap, perspective and sharpness makes it possible to explain more precisely why a space feels open or restricted.
Colour adds another form of separation that should not be confused with focus. A figure can stand out because of its colour even when the background has a similar level of definition. Conversely, similar colours can visually unite objects at different distances. Our reading of the shot depends on these resources working together, not on a single measure of depth.
The practical question is what information can be examined at the same time, and what requires a change of shot, focus or position. In Barry Lyndon and The Shining, this distribution takes different forms. Focus can concentrate attention, follow it or leave a secondary element available; its function is understood by comparing it with the action and the time allowed for looking, not by assuming that Kubrick universally preferred to have everything in focus.
Films discussed: Stanley Kubrick, Barry Lyndon (1975); The Shining (1980). Documentation: Herb A. Lightman, interview with John Alcott, ‘Photographing Stanley Kubrick’s Barry Lyndon’, American Cinematographer, March 1976.
View all articles in Kubrick’s photography, camera and cinematic effects
